01 / AXES
Roll · Pitch · Yaw Platform
The platform uses three motion axes with distinct angular-freedom envelopes.
- Inner axis: Roll
- Middle axis: Pitch
- Outer axis: Yaw
- Axis-specific angular travel limits
FDA-335-V1 is a three-axis rate-table platform with dedicated inner, middle, and outer axes for Roll, Pitch, and Yaw. The official parameter sheet highlights axis-specific angular freedom, position performance, rate control, dynamic bandwidth, UUT wiring capacity, and installation-ready physical specifications.
Inner Roll, middle Pitch, and outer Yaw axes are individually specified in the manufacturer sheet.
Each axis has its own angular-freedom envelope instead of unlimited continuous rotation.
All axes share the same published rate range, resolution, and rate-accuracy values.
The table-top interface supports both 3 A and 7 A electrical lines to the UUT.
The FDA-335-V1 product sheet presents a compact three-axis rate table with inner Roll, middle Pitch, and outer Yaw axes. Unlike a continuous-rotation simulator, the axes here use bounded angular travel values of ±60°, ±40°, and ±95° respectively.
The table-top specification block lists a 7.5 kg maximum UUT weight, 236 × 275 × 282 mm UUT dimensions, and an aluminum hard-anodized table top. UUT connectivity includes 92 lines at 3 A and 6 lines at 7 A.
The published performance blocks separately cover position, rate, dynamic bandwidth and acceleration, orientation error, and the main operating and physical conditions.
System attributes and performance categories stated in the official ACCUDYNA product sheet.
The platform uses three motion axes with distinct angular-freedom envelopes.
All three axes share the same published position-performance values.
Each axis is rated with the same range, resolution, and accuracy values for controlled rate motion.
The table-top and electrical interface data define how the test article is mounted and wired.
All three axes
All three axes
Roll · Pitch · Yaw
Published orientation error
The official sheet shows the same published rate range, resolution, and accuracy across all three axes, while angular freedom differs per axis. Dynamic bandwidth is listed as 20 Hz for Roll, 30 Hz for Pitch, and 15 Hz for Yaw, with acceleration above 300 °/s² for all axes.
Derived directly from the published rate-table parameter blocks.
Roll, Pitch, and Yaw movement are all separately defined in the manufacturer sheet.
The platform provides bounded angular freedom rather than continuous rotation.
Each axis has a published accuracy, repeatability, and command-resolution value.
All axes are listed with ±120°/s range and ±0.01°/s resolution.
Dynamic blocks define bandwidth and no-load acceleration by axis.
Electrical lines to the UUT support wired test articles and interfaces.
The official sheet includes floor-referenced geometry, dimensions, weight, and power data.
The axes-intersection distance from floor is explicitly specified.
Operating and storage temperature ranges are listed directly in the product sheet.
Values below follow the official ACCUDYNA product sheet. Axis-dependent values are shown separately where applicable.
One concise manufacturer sheet containing the complete table-top specification block, Roll / Pitch / Yaw axis data, position and rate performance, dynamic bandwidth, environmental conditions, and physical dimensions.
The official sheet emphasizes bounded angular freedom on all three axes, symmetric core rate specifications, strong UUT wiring capacity, and a compact physical footprint for laboratory integration.
Three axes with ±60° / ±40° / ±95° travel
Rate range ±120 °/s on all axes
Bandwidth 20 / 30 / 15 Hz
92 lines 3 A + 6 lines 7 A to the UUT
Hard-anodized aluminum table top
Answers based on the official product sheet.
Discuss axis travel limits, UUT dimensions, electrical-line requirements, bandwidth needs, and installation constraints for your next three-axis rate-table setup.
Request a Quote →