01 / AXES
Unlimited Roll + Pitch + Yaw
All three axes provide unlimited angular freedom for continuous multi-axis rotation.
- Inner axis: Roll
- Middle axis: Pitch
- Outer axis: Yaw
- Unlimited angular freedom on all axes
FDA-335-V2 is a three-axis rate-table platform with inner Roll, middle Pitch, and outer Yaw axes. The official product sheet lists unlimited angular freedom on all three axes, higher rate capability than V1, axis-specific dynamic bandwidth, strong UUT electrical connectivity, and a 10 kg maximum UUT capacity.
Roll, Pitch, and Yaw axes are all listed with unlimited angular freedom.
Each axis is specified for ±200°/s rate range with ±0.01°/s resolution.
No-load acceleration is listed above 500°/s² on Roll and above 300°/s² on Pitch and Yaw.
80 lines at 2 A and 15 lines at 6 A are routed to the Unit Under Test.
The FDA-335-V2 is presented as a three-axis rate table with inner Roll, middle Pitch, and outer Yaw axes. The defining difference in the published sheet is that angular freedom is unlimited on all three axes.
The table-top specification block lists a 10 kg maximum UUT weight, UUT dimensions of 400 × 200 × 240 mm, an aluminum table top, and extensive UUT wiring consisting of 80 lines at 2 A plus 15 lines at 6 A.
All three axes are listed with the same core rate performance: ±200°/s range, ±0.01°/s resolution, and accuracy better than 0.1°/s.
Key motion, position, dynamic, and UUT-interface specifications stated in the official product sheet.
All three axes provide unlimited angular freedom for continuous multi-axis rotation.
The product sheet publishes identical position-performance values for Roll, Pitch, and Yaw.
All three axes share the same published rate range, resolution, and accuracy.
The table-top interface provides higher UUT capacity and a substantial set of electrical lines.
All three axes
All three axes
Roll · Pitch · Yaw
All three axes
The official sheet shows unlimited angular freedom and identical core rate performance across Roll, Pitch, and Yaw. Dynamic bandwidth is listed as 20 Hz for Roll and 10 Hz for both Pitch and Yaw. No-load acceleration is listed above 500 °/s² on Roll and above 300 °/s² on Pitch and Yaw.
Derived directly from the product-sheet specification blocks.
The inner Roll axis is listed with unlimited angular freedom.
The middle Pitch axis also supports unlimited angular freedom.
The outer Yaw axis completes the unlimited three-axis motion set.
Each axis publishes accuracy, repeatability, and command-resolution values.
All axes are rated for ±200°/s with ±0.01°/s resolution.
Axis-specific bandwidth and no-load acceleration values define the dynamic envelope.
95 electrical lines in two current classes support connected UUTs.
The table-top interface supports a maximum UUT weight of 10 kg.
The listed operating range extends from -10 to +50 °C.
Values below reproduce the official ACCUDYNA product-sheet data. Axis-dependent values are shown separately.
One complete manufacturer sheet containing the table-top data, unlimited Roll / Pitch / Yaw freedom, position specifications, higher-speed rate performance, dynamic characteristics, and physical installation requirements.
The FDA-335-V2 sheet emphasizes unlimited three-axis rotation, higher ±200°/s rate capability, strong acceleration performance, and a higher-capacity UUT interface.
Unlimited Roll / Pitch / Yaw rotation
±200°/s rate range on all axes
20 / 10 / 10 Hz bandwidth
80 lines 2 A + 15 lines 6 A to UUT
10 kg maximum UUT weight
Answers based on the official product sheet.
Discuss unlimited-axis operation, UUT size and wiring requirements, rate performance, dynamic bandwidth, and installation constraints for your next three-axis rate-table system.
Request a Quote →