01 / AXES
Roll + Pitch + Yaw
Three axes provide a hybrid manual/motorized motion configuration.
- Roll angular freedom: +90°
- Pitch angular freedom: +90°
- Yaw angular freedom: Continuous
- Yaw is the motorized axis
S2 is a compact three-axis simulator combining manually positioned Roll and Pitch axes with a motorized continuous Yaw axis. The official sheet highlights ±900°/s Yaw speed, manual 15° locking increments on Roll and Pitch, 81 electrical lines to the UUT, and a compact 55 kg platform.
Roll and Pitch are manual while Yaw is motorized and continuously rotatable.
The outer axis is specified for a rate range of ±900°/s.
Roll and Pitch use defined 15° locking increments.
Published dimensions are 550 × 550 × 980 mm with a 55 kg table weight.
The S2 is a three-axis simulator with inner Roll, middle Pitch, and outer Yaw. Roll and Pitch use manual positioning, while Yaw is motorized.
Angular freedom is listed as +90° for Roll, +90° for Pitch, and continuous for Yaw. Roll and Pitch use locking positions at each 15°.
The UUT specification block lists dimensions of 220 × 120 × 150 mm and 81 electrical lines at 2 A to the Unit Under Test.
Motion, positioning, and physical characteristics stated in the official S2 product sheet.
Three axes provide a hybrid manual/motorized motion configuration.
The positioning mechanism differs by axis.
Roll and Pitch are positioned with discrete manual lock positions.
The official sheet lists a compact UUT envelope with electrical access to the test article.
Manual axis
Manual axis
Motorized axis
Motorized position control
The S2 sheet identifies the outer Yaw axis as the motorized axis. Published Yaw position values are 0.1° accuracy, 0.01° command resolution, and 0.1° display accuracy, with a rate range of ±900°/s.
Derived directly from the manufacturer’s one-page parameter sheet.
Roll is manually positioned through its +90° angular envelope.
Pitch is manually positioned through its +90° angular envelope.
The outer axis provides continuous motorized rotation.
Roll and Pitch use manual locking positions at each 15°.
The motorized Yaw axis is rated up to ±900°/s.
Yaw includes command-resolution and display-accuracy specifications.
81 electrical lines at 2 A support connected test articles.
The table footprint is 550 × 550 mm with a height of 980 mm.
The published rate-table weight is 55 kg.
Values below reproduce the official ACCUDYNA one-page product-sheet data.
One complete manufacturer sheet containing the UUT interface, hybrid manual / motorized axis configuration, Yaw speed data, position values, orientation error, and compact physical installation specifications.
The S2 sheet emphasizes a compact hybrid three-axis architecture, manual Roll and Pitch setup, continuous high-speed Yaw motion, and straightforward laboratory installation.
Manual Roll and Pitch positioning
Continuous motorized Yaw
±900°/s Yaw rate range
81 lines 2 A to the UUT
55 kg compact table platform
Answers based on the official product sheet.
Discuss manual Roll/Pitch setup, continuous high-speed Yaw requirements, UUT wiring, position accuracy, and compact installation needs for your next simulator system.
Request a Quote →